365体育比赛投注

Working copy

Page PDF

Mechatronics Engineering Technology, A.A.S.

Requirements

The Mechatronics Engineering Technology Degree from Utah Valley University prepares graduates to work in the Utah manufacturing sector as an automation technologist, design technician, PLC programmer, as well as many other aspects of implementing manufacturing systems. Students complete courses in PLC programming and architecture, materials, CAD, electrical and mechanical components, pneumatics, and motor control. Students will also take courses in technical writing, physics, chemistry, and business to round out their professional profile.

Total Program Credits: 63365体育比赛投注

General Education Requirements: 23 Credits
  ENGL 1010 Introduction to Academic Writing 3
or  ENGH 1005 Literacies and Composition Across Contexts (5)  
  ENGL 2010 Intermediate Writing Academic Writing and Research 3
  ENGL 2310 Technical Communication 3
  ECON 1010 Economics as a Social Science 3
or MGMT 1010 Introduction to Business (3)  
  PHYS 2010 College Physics I 4
  PHYS 2015 College Physics I Lab 1
  HLTH 1100 Personal Health and Wellness 2
or PES 1097 Fitness for Life (2)  
  MATH 1050 College Algebra 4
or MATH 1055 College Algebra with Preliminaries (5)   
Discipline Core Requirements: 40 Credits
  EGDT 1071 3 Dimensional Modeling--Solidworks 3
  MECH 1010 Introduction to Mechatronics 3
  MECH 1200 Electronics in Automation Design 3
  MECH 1205 Electronics in Automation Design Laboratory 2
  MECH 1300 Industrial Wiring for Mechatronic Systems 2
  MECH 2200 Semiconductors Used in Mechatronic Systems 3
  MECH 2205 Semiconductors in Mechatronic Systems Lab 1
  MECH 2300 Microcontroller Architecture and Programming 4
  MECH 2305 Microcontroller Architecture and Programming Lab  1
  MECH 2400 Mechanical Components 4
  MECH 2500 Introduction to PLCs in Mechatronic Design 2
  MECH 2505 Introduction to PLCs in Mechatronic Design Laboratory 2
  MECH 2510 Fundamentals of Automation Controls 2
  MECH 2515 Fundamentals of Automation Controls Laboratory 1
  MECH 2550 Advanced PLC Programming and Applications 2
  MECH 2555 Advanced PLC Programming and Applications Laboratory 2
  MECH 2600 Introduction to Fluid Power Systems 3

Graduation Requirements:365体育比赛投注

  1. Completion of 63 or more credit hours.
  2. Overall grade point average of 2.0 (C) or above, with no core course below a C-.
  3. Residency hours: minimum of 20 credit hours through course attendance at UVU.
  4. Completion of GE and specified departmental requirements.

Graduation Plan

NOTE: This Graduation Plan has not been updated by the Construction Technologies Department. Please contact the department for an updated plan.

This graduation plan is a sample plan and is intended to be a guide. Your specific plan may differ based on your Math and English placement and/or transfer credits applied. You are encouraged to meet with an advisor and set up an individualized graduation plan in Wolverine Track365体育比赛投注. 

365体育比赛投注Milestone courses (pre-requisites for a course in one of the subsequent semesters) are marked in red and italicized.

Semester 1 Course Title Credit Hours
MATH 1050 OR MATH 1055 College Algebra 4
MECH 1010 Introduction to Mechatronics 3
MECH 1200 Electronics in Automation Design 3
MECH 1205 Electronics in Automation Design Lab 2
ENGL 1010 OR ENGH 1005 Introduction to Writing OR Literacies and Composition Across Contexts 3
  Semester total: 15
Notes: Mechatronics has a fall start only. MECH 1200 and 1205 are only offered in the fall semester.   
Semester 2 Course Title Credit Hours
MECH 1300 Industrial Wiring for Mechatronic Systems 2
EGDT 1071 3 Dimensional Modeling--Solidworks 3
MECH 2200 Semiconductors Used in Mechatronic System 3
MECH 2205 Semiconductors Used in Mechatronic System Lab 1
MECH 2300 Microcontroller Architecture and Programming 4
MECH 2305 Microcontroller Architecture and Programming Lab 1
ENGL 2010 Intermediate Writing/Academic Writing and Research 3
  Semester total: 17
Notes: MECH 1300, 2200, 2205, 2300, and 2305 are only offered in the spring semester.   
Semester 3 Course Title Credit Hours
MECH 2400 Mechanical Components 4
MECH 2500 Introduction to PLCs in Mechatronic Design 4
MECH 2510 Automation Systems Sensors 3
ECON 1010 OR MGMT 1010 Economics as a Social Science SS OR
Introduction to Business SS
3
HLTH 1100 or PES 1097 Personal Health and Wellness or Fitness for Life 2
  Semester total: 16
Notes: MECH 2400, 2500, and 2510 are only offered in the fall semester.   
Semester 4 Course Title Credit Hours
MECH 2550 Advanced PLC Programming and Applications 4
MECH 2600 Introduction to Fluid Power Systems 3
PHYS 2010 and 2015 College Physics I and Lab 5
ENGL 2310 Technical Communication HH 3
  Semester total: 15
  Degree total: 63
Notes: MECH 2550 and 2600 are only offered in the spring semester.   

Department

Name:

Engineering Technology

Location:

CS 632

Telephone:

365体育比赛投注801-863-6232

Email:365体育比赛投注

engtech@fishncamp.com 365体育比赛投注

Web Address:365体育比赛投注

fishncamp.com/et

Chair:365体育比赛投注

Tyler Bird 365体育比赛投注

 
 

Mission Statement

365体育比赛投注The Mission of the Engineering Technology Department is to prepare graduates to work in high demand, very technical, vastly diverse, automated industries that provide products and services to keep our state and national economy running. The Mechatronics graduates are focused on designing the newest machines and automated systems. The Electrical Automation and Robotics Technology graduates keep industry running by fixing, adapting, programming, integrating, and maintaining highly technical automated machines and systems.  The Engineering Technology Department uses a hands on engaged learning approach utilizing real industrial equipment. 

 
 

Electrical Automation & Robotics Technology

 

Advisory Committee:365体育比赛投注

Jeff Duncan, Anadarko Petroleum Corp; Nasir Khan, BD Medical; Steve Heaps, Codale Electric Supply, Inc; Shawn Beck, Dannon; Samuel Duncan, IM Flash Technologies; Kent Angell, Nestle;; Ryan Park, Precision Automated Technology; Don Root, Precision Systems Engineering; Scott Seals, RioTinto; Tom Wright, Syscon Automation Group, LLC; Shane Williams, US Synthetic; Troy Cooley, Chevron; Evan Woody, Elite Automation; Chris Keller, Fiero Fluid Power; William Fitzgerald, JR Automation SetPoint; Joe VanDenBerghe, JR Automation Setpoint; Janet Litley, JR Simplot; Dan Bell, Kimberly- Clark; Dave Thompson, Kimberly- Clark; JR Christensen, Lyly W. Williams Co.; Caleb Rowley, Purple; Mike Hansen, Rockwell Automation365体育比赛投注

Programs365体育比赛投注

Four options are available: Associate in Applied Science Degree (AAS), Associate in Science Degree (AS) in Electrical Automation and Robotics Technology, Bachelor of Science (BS) in Mechatronics Engineering Technology, or Bachelor of Science (BS) in Technology Management.

 
 

Mechatronics Engineering Technology


Advisory Committee:

Michael Quayle, Autoliv; Perter Ranthjen, Autoliv; Todd Russell, IM Flash; Don Root, Precision Systems Engineering

Programs

Two options are available: Associate in Applied Science Degree (AAS), and Bachelor of Science (BS) in Mechatronics Engineering Technology

Laptop Requirement

Laptop will be required for all MECH courses. Please see Mechatronics advisor for details.

 
 

Faculty

Rawan Al-Nsour(2018)

Assistant Professor

Department: Engineering Technology
Faculty



B.S., Mechanical Engineering, Jordan University of Science & Technology, M.Sc., Industrial Engineering, University of Jordan, Ph.D., Mechanical/Nuclear Engineering, Virginia Commonwealth University.

Directory Page >>

 

Tyler Bird(2015)

Assistant Professor

Department: Engineering Technology
Department Chair, Faculty



A.A.S., Electrical and Automation, Utah Valley University; B.S., Electrical Engineering, Brigham Young University; M.Engr., Electrical Engineering, University of Idaho

Directory Page >>

 

Mike Elbert(2019)

Assistant Professor

Department: Engineering Technology
Faculty



B.S., Electrical Engineering, University of Alaska, Fairbanks, M.S., Engineering Management, Michigan Technological University.

Directory Page >>

 

David Frame(2018)

Assistant Professor

Department: Engineering Technology
Faculty



B.S.EET, Purdue University, Electronic Engineering, A.S., Electronics/Robotics, Vincennes University, M.S., Technology, Computer Systems, Arizona State University.

Directory Page >>

 

Travis Fraughton(2016)

Lecturer

Department: Engineering Technology
Faculty



A.A.S., Electrical Automation & Robotic Technology, Utah Valley Community College.

Directory Page >>

 

Tim Hakala(2018)

Assistant Professor

Department: Engineering Technology
Faculty



B.S., Electrical & Computer Engineering, Brigham Young University - Provo; M.Eng, Electric Power Engineering, Rensselaer Polytechnic Institute; Ph.D., Mechanical Engineering, Brigham Young University - Provo.

Directory Page >>

 

Diana Lundahl(2014)

Associate Professor

Department: Engineering Technology
Faculty



A.S., Electronic Technology, Utah Valley State College; B.S., Electronics Engineering, Weber State University.

Directory Page >>

 

Scott Searle(2014)

Lecturer

Department: Engineering Technology
Faculty



Master Electrician

Directory Page >>

 

William Walker(2015)

Assistant Professor

Department: Engineering Technology
Faculty



B.S., Electronic Engineering, M.B.A., Weber State University; Ph.D. (ABD), Educational Leadership, University of Nevada, Las Vegas.

Directory Page >>

 

Careers

Careers:  
Graduates from the Mechatronics Program will find gainful and rewarding employment in the Utah manufacturing sector. Manufacturing is an expanding sector of the Utah economy and graduates from the Mechatronics Program find employment in the automotive, medical, food, and sporting goods industries as Automation Technologists. With the blend of electronics and mechanics the graduates integrate into careers maintaining, upgrading, and designing new technically demanding automation systems that are the foundation of manufacturing production. Starting and long term salary potential is excellent for Mechatronics Technologists and the opportunity to work in a high demand occupation with a great salary potential makes the Mechatronics an excellent long term career choice. Graduates also have the option to continue their education in the Technology Management Program that will provide the opportunity to transition their careers into a supervision or management path after several years of technical employment.

Interested in a Career related to this degree? Learn more about...

  • Occupation Description
  • Employment Projections
  • Occupation Wages
  • Related Occupations
  • Current Job Openings
  • And more

Follow the links below to view current, detailed Utah Department of Workforce Services occupational information for that career.

RELATED CAREERS

^ Back to Top